The Riga Greenhouses are one of the strongest greenhouses you can buy for the money and are attractive and fits well into any upscale garden setting. The range of Riga Greenhouse offers more window and door ventilation than another units it is class. The polycarbonate glazing on the Riga Greenhouse is German made and believed to be of superior quality then the much more common Polygal or GE glazing.
The unique "Onion" shaped design of a Riga Greenhouse offers optimal headroom inside, but with enough slope on the outside so that heavy snow loads slide down and severe winds easily pass over the greenhouse
Riga Greenhouses are truly the European definition of a greenhouse - to grow fresh vegetables, herbs, and flowers in the middle of the harshest winters. Other Greenhouses brands use less than 8 mm twin-wall polycarbonate which can only be used to when only a slight night frost might be expected during the spring or fall season. At best they can only be used to house established plants during the winter season. One major advantage of the Riga's construction method is that the frame profiles are permanently attached to each other, and won't come loose over time due to wind pressures. The "onion" has no eaves or shoulders giving it significantly less wind resistance. The Riga Series is the only greenhouse with an oversized, hinged, rear wall window at 42" tall and 30" wide and an oversized roof window 40" wide and 24" deep (equivalent to 2 regular size roof windows).
Riga Greenhouses also has one of the best ratios between aluminum framing and twin wall polycarbonate panels, which allows for maximum light transmission and less "moving" shade.
Riga III Greenhouse is one of the most popular models of Riga. With a combination of strong materials and durable hardware, the first Riga III Greenhouse was considered by far the strongest greenhouse under $5,000. This Greenhouse measures ten feet in length and offers both seven and nine foot width options with up to 102 internal square feet. Like all the other Riga greenhouses the III series was created to weather harsh winters so you can grow all year long.
Riga Greenhouses comes in different ranges.
Riga XL Professional Greenhouses - 14' wide, up to 29' 6" long Riga XL greenhouses can be used professionally or in your backyard. They share the signature shape and strength of their smaller siblings while providing ample space for the largest of gardens
Have lots of fun and success with your RIGA greenhouses from Hoklartherm - enjoy the fruits of your labor!
- Sort by Featured
- Sort by Best Selling
- Sort by Alphabetically, A-Z
- Sort by Alphabetically, Z-A
- Sort by Price, low to high
- Sort by Price, high to low
- Sort by Date, new to old
- Sort by Date, old to new
Why Buy a Riga Greenhouse?
Riga Hobby Greenhouse has a special shape, which is designed to offer optimal headroom inside, but with enough slope on the outside so that heavy snow loads slide down and severe wind blows right over
Comes with a large Dutch barn style door – with key & lock
Unique design of the Riga Greenhouse Kit has the best ratio between aluminum framing and polycarbonate panels, which allows for maximum light transmittance and less “moving” shade
Comes standard with an oversized rear-wall window for better ventilation
Riga S & L: 8 mm twin-wall polycarbonate glazing as side panels & 10 mm twin-wall polycarbonate glazing in the front and back walls
Riga XL: 16mm triple-wall polycarbonate on all sides
Compared to the Riga S line, the Riga L and XL has more headroom and space in square feet
Designed, Engineered, and Manufactured in Germany with 30 years of experience
Where is Riga Greenhouse made?
Designed, engineered, and manufactured in Germany by Hoklatherm, a leading manufacturer of commercial and hobby greenhouses, sunrooms, pavilions, pool covers, home additions, and commercial building, with 28 years experience. The RIGA Greenhouses are a true representation of a European Greenhouse - designed to be used to grow fresh vegetables, herbs and flowers in the middle of winter.
How do you install a Riga Greenhouse?
You will find the assembly of the RIGA greenhouse to be quick and easy if you carefully follow these Assembly Instructions. The assembly requires only two people, but it will go quicker if you have access to a 3rd person who can help from time to time - this person does not need to be especially strong or handy.
Contents: Hoklartherm inspectors carefully check the contents of each package. Nonetheless, we ask you to do the same: Check the contents of each package against the table of contents in this Manual.
Choose the best location: Please choose, if possible, a sunny and protected location for your greenhouse. Avoid a heavily shaded near buildings and/or trees. However, also be careful to avoid bright, direct sunlight (especially in the Southwestern part of the United States). High-intensity sunshine is not good for more than a few hours a day. In such areas some protection from trees and/ or buildings is recommended. Shade cloth might also be needed (ask your supplier for details). For greenhouses intended for growing vegetables such as tomatoes, cucumbers and melons we recommend the greenhouse be located in a north-south direction, and for those to be used for flowers and pot plants orient it in an east-west direction.
CAUTION: Do not attempt to assemble the RIGA greenhouse while a wind is blowing - your Glazing Panels might blow away. Do not expose the Glazing Panels, with their special protective film, to bright sunlight or the film will become permanently glued to the Panels before the film is removed during installation.
1) The Riga Greenhouse assembly has to be executed by at least two people - a 3rd person to help out from time-to-time is recommended!
2) Work cautiously, with the proper tools. Make sure that the stepladder’s footing is secure!
3) We recommend that you work with gloves (although all of the edges have been filed, it is always possible for you to be cut when handling either the aluminum or polycarbonate parts).
Suggestion: Before you begin - read all these instructions to become familiar with each step of the assembly process. You might decide that you find it easier to complete the assembly process in a different sequence. Several sequences are possible. For example, some people may prefer to build all of the greenhouse frame first and then insert the Glazing Panels, while others may prefer to interchange these steps.
RIGA Greenhouse Maintenance
The Riga greenhouse only requires minimal care and/or maintenance:
- To clean: We recommend a treatment similar to those for washing your car: Rub with a soft brush and lots of water (very mild soap). Never use abrasive materials as you do not want to scratch the UV filter on top of the Glazing Panels.
- The pressure cylinder of the Automatic Window Opener should be removed during frost season and be kept frost-free. The rod assembly of the Opener can stay in the greenhouse. Tie the rod assembly arms together with string or wire while the cylinder is not in place to prevent the window from blowing open in stormy weather.
- Your RIGA greenhouse should be ventilated as much as possible especially when condensation develops. (However, high humidity is preferred by some plants and especially during the seed-to-seedling stage).
Riga greenhouse is perfect for you if you…
Want a well-engineered greenhouse: Made in Germany
Want to grow plants year-round: Riga S & L has 8-10mm Polycarbonate glazing, Riga XL has 16mm Polycarbonate
Need a greenhouse that has to survive heavy snow loads and wind
Are looking for a long warranty: 10 years on Polycarbonate, 15 years on frame
Want great insulation on your greenhouse: Heavy-duty rubber seals and Silicon caulk around windows
Need more light for your plants: The shape optimizes the incidence of light
Want the perfect growing environment for your plants: Riga provides a great light diffusion and ventilation with roof vents, automatic vent openers, barn-style doors, and a rear wall window
Riga greenhouses are not for you if…
…you don’t care about quality and just need a basic budget-friendly greenhouse.
When you have finished the assembly of a Riga greenhouse, we are confident you will be completely satisfied with the quality of the product.
Financing available on all Riga Greenhouse equipment.